MCC iPort / i2cStick Windows USB VCP Driver v6.7
MCC Windows USB VCP Driver v6.7 (for Windows XP/Vista/7/8/8.1)

This driver update supports MCC's popular USB-base I2C Bus adapters.

Key Features:

  • Adds support for iPort/USB 2TM I2C Bus Host Adapter. 
  • Adds support for Windows 8.1+
  • Improved support for USB v3.0 Extensible Host Controllers (XHCI)
  • Includes Virtual Communications Port (VCP) Drivers v6.7.

Supported MCC I2C Bus host adapters include:

  • iPort DLL/USB (#MIIC-201D/U)
  • iPort/USB (#MIIC-204)
  • i2cStick (#MIIC-207)
  • iPort/USB 2 (#MIIC-208)
  • i2cStick 2 (#MIIC-209)
Supported Operating Systems:
  • Windows XP (x86), Vista/7/8/8.1 (x86/x64).
Corrections, Enhancements, and New Features:
  • Adds support for i2cStick 2TM and iPort/USB 2TM I2C Bus Host Adapter.
  • Includes USB Virtual Communication Port (VCP) driver v6.7
  • Improved support for USB v3.0 Extensible Host Controllers (XHCI)
  • Windows 8.0, and 8.1 support.
    This copyrighted product update is offered free of charge to users of MCC I2C Bus host adapters. Its use is covered by the MCC license agreement available during installation.
Download and Installation Instructions:

NOTE: MCC recommends that you leave older versions of driver files on your system. Other devices on your system may reference older versions of drivers and may stop functioning correctly if the driver files are removed. 

  1. Administrative Privilege Required.
  2. Download and save-as the ZIP file into a folder.
  3. Right-Click the downloaded ZIP file and Extract All (Uncompress).
  4. Unplug the MCC USB to I2C Bus Adapter(s) from your PC USB port or USB hub.
  5. To add the driver to your system, open the extracted folder and:
  6. a. For 64-bit Windows OS: Double-click MCC_USB_VCP_Installer_x64.exe.
  7. b. For 32-bit Windows OS: Double-click MCC_USB_VCP_Installer_x86.exe.
  8. To load the new driver, plug the MCC USB to I2C Bus Adapter(s) into a USB port or self-powered hub.
  9. Windows will automatically load the driver and reuse or assign a new COM port number (COMn) to the MCC USB to I2C Bus Adapter(s).
  10. Use the iPort Message Center or Windows Device Manager to find the assigned COMn number.
  11. For additional software and hardware installation instructions, see the Installation Section of the specific adapter User's Guide.
Click to Download (4MB)