iBurner I2C EEPROM Programmer Software (V1.0)

Click for Larger View

iBurner is our I2C Bus Serial EEPROM Programmer software package that provides a quick and easy way to blank-check, program, read, and verify a wide variety of I2C Bus EEPROMs. iBurner includes a device library with many popular I2C EEPROM devices, and supports adding your own additional devices. iBurner is compatible with MCC ASCII interface based I2C Bus host adapters including the iPort/AI, iPort/AFM, and iPort/USB. System requirements include Windows 2000, XP, or higher, and Microsoft .NET Version 2.0 or above.

PRODUCT HIGHLIGHTS Blank-check, Program, Read, and Verify almost any I2C Bus EEPROM from your PC. Supports 7-bit addressing Standard (100k) and Fast (400k) Mode I2C Bus Activity. Supports in-system programming on an active (multi-master) bus. Supports configurable EEPROM bank, page, and word address size. Supports configurable retry count. Supports configurable I2C Bus Clock Rate. Built-in I2C EEPROM Device Library. Add new devices to the Device Library. Import or Export Device Descriptions. Compatible with our iPort/AI, iPort/AFM, and iPort/USB host adapters.

Download User's Guide (368KB)

Supported Host Adapters:

iPort/USB (#MIIC-204, Datasheet)
iPort/AFM (#MIIC-203, Datasheet)
iPort/AI (#MIIC-202, Datasheet)

Update Distribution/Licensing:

This copyrighted product  is offered free of charge to current owners of our iPort/AI, iPort/AFM, or iPort/USB I²C Bus host adapters. Its use is covered by the MCC End User License Agreement included with the downloadable package below.

iBurner is a Microsoft.NET application. To operate iBurner, you will need Windows 2000 or XP+, and MS.NET V2 or higher installed on your computer. To find out if you already have MS.NET V2 installed on your computer, go to:

(www.microsoft.com/downloads), or

click Start | Settings | Control Panel | Add or Remove Programs, and look in the list of installed software for "Microsoft .NET Framework 2.x".

If MS.NET V2 is already installed on your computer, you can download the iBurner+User's Guide ONLY file below (1).

If your system does not already have MS.NET V2 installed, you can download MS.NET V2.0 or above from the Microsoft website, or download the MS.NET 2.0 + iBurner + User's Guide file below (2). This download will install MS.NET V2.0 on your computer if required.

1. Click the appropriate Download link below and save the file into a new installation folder on your Windows based PC.
2. After the download is complete, Double-click the file to install. Follow on screen instructions.
3. Click Start | Programs | iBurner | iBurner to start the program.
4. See the User's Guide for additional instructions.