IP-201 I2C Bus Multiplexer Board

The IP-201 is a 4 channel I2C Bus Multiplexer Board that provides an easy way to connect multiple I2C Buses to a common I2C Bus port. The IP-201 lets you test multiple I2C based products simultaneously from a common I2C Bus port while avoiding Bus Address conflicts.

Key Features Connect to one of four (4) separate I2C Buses. Bus selection controlled directly over the I2C Bus. No extra Hardware required. Able to Disconnect from ALL attached Buses. LED indicators show selected Bus. Uses one Jumper Selectable I2C Address (40...4E). Use multiple IP-201 Multiplexers in Linear (up to 32 Buses) or Cascading (up to 64K Buses) Topologies. Based on the iPack Stackable Board Format. Supports Stacked or Remote board configurations. Compatible with 3.3v to5v Systems. (with 3.3v option)

TYPICAL APPLICATIONS

Parts List

• The IP-201 I2C Bus Multiplexer Board.
• I2C Interface Cable (4 Ft.).
• Configuration Instructions.

Other configurations available on OEM orders.

Optional Add-On Parts

• Wall Transformer (#MWT-5VA, MWT-5VAE, or MWT-5VAI).
• I2C Interface Cables 4 Ft.(#CAB4).
• iPort I2C Host Adapter.

•      Operating Temperature: 10º C to 35º C (50º F to 95º F)
•      Storage Temperature: -40º C to 65º C (-40º F to 149º F)
•      Operating Relative Humidity: 20% to 80% non-condensing
•      Maximum humidity gradient: 10% per hour, operational and non-operational conditions
•      Storage Relative Humidity: 5% to 95% non-condensing
•      Operating Altitude: -16m to 3,048m (-50 ft to 10,000 ft)
•      Storage Altitude: -16m to 10,600m (-50 ft to 35,000 ft)