MCC Mac OSX USB VCP Driver v4.x.5
MCC Mac OSX USB VCP Driver v4.x.5

This driver supports MCC's popular USB-base I2C Bus adapters.

Key Features:

  • Supports all MCC ASCII-based USB to I2C Bus Host Adapters. 
  • Supports Macintosh OSX for the Intel and PowerPC Platforms.
  • Includes Mac OSX Virtual Communications Port (VCP) Driver v4.x.5.

Supported MCC I2C Bus host adapters include:

  • iPort/USBTM (#MIIC-204)
  • i2cStickTM (#MIIC-207)
  • iPort/USB 2TM (#MIIC-208)
Supported Operating Systems:
  • Macintosh OSX for the Intel and PowerPC Platforms.
  • Versions 10.5, 10.6, 10.7, 10.8,  10.9, and 10.10.

Corrections, Enhancements, and New Features:

  • Initial release.
    This copyrighted product is offered free of charge to users of MCC I2C Bus host adapters. Its use is covered by the MCC license agreement available during installation.
Download and Installation Instructions:

NOTE: MCC recommends that you leave older versions of driver files on your system. Other devices on your system may reference older versions of drivers and may stop functioning correctly if the driver files are removed. 

  1. Download and save-as the ZIP file into a folder on your Mac.
  2. Double-Click the downloaded ZIP file and Extract All (Uncompress).
  3. Unplug any MCC USB to I2C Bus Adapter(s) from your USB port or USB hub.
  4. Open the extracted folder.
  5. Mount the extracted DMG file.
  6. Double-click driver package.
  7. Follow on-screen instruction.
  8. To load the new driver, plug the MCC USB to I2C Bus Adapter(s) into a USB port or self-powered hub.
  9. Mac OSX will automatically load the driver and assign a /dev name to the MCC USB to I2C Bus Adapter(s).
  10. See the extracted ReleaseNotes file for driver uninstall information.
  11. For additional software and hardware installation and interface instructions, see the Installation Section of the specific adapter User's Guide.
Click to Download (400KB)