iBurner I2C Bus EEPROM Programmer Software (V3.1)

iBurner EEPROM Programming Setup

iBurner is our I2C Bus Serial EEPROM Programmer software package that provides a quick and easy way to blank-check, program, read, and verify a wide variety of I2C Bus EEPROMs. iBurner includes a device library with many popular I2C EEPROM devices, and supports adding your own additional devices. This exciting release supports our iPort/LAN Eithernet to I2C Bus adapter. Sit in your office and access the I2C Bus EEPROM in your Target System on your desk, in your lab, in your factory, or at your customer's site. iBurner V3.1 adds: Direct, Local (LAN), or Remote (Internet) EEPROM access via our iPort/LAN Eithernet to I2C Bus adapter. Target System Control while accessing the EEPROM. Expanded I2C Bus adapter Descriptors. Automatic display ALL available I2C Bus adapters. Supported I2C Bus EEPROM  Device Database (iBurner Device Database). iBurner is compatible with MCC ASCII interface based I2C Bus host adapters including the iPort/AI, iPort/AFM, iPort/USB, iPort/LAN, and i2cStick. System requirements include Windows XP, Vista, 7, or 8, and Microsoft .NET Framework V2.0 or above.

PRODUCT HIGHLIGHTS Blank-check, Program, Read, and Verify almost any I2C Bus EEPROM from your PC. Includes programming automation support with our Script Builder tool. Supports Hex, S-Record, and Binary file formats. Supports 7-bit addressing Standard (100k) and Fast (400k) Mode I2C Bus Activity. Supports in-system programming on an active (multi-master) bus. Supports configurable EEPROM bank, page, and word address size. Supports configurable I2C Bus Clock Rate. Supports Target System control via adapter /INT signal (on /INT supported adapters). CRC-16 Checksums. Built-in I2C EEPROM Device Database. Add your EEPROM devices to the Device Database. Import or Export Device Descriptions. Automatic logging of programming operations. Compatible with MCC iPort/AI, iPort/AFM, iPort/USB, iPort/LAN, and i2cStick host adapters.

User's Guide (PDF)

V3.1 Revisions:

1. Add support for iPort/LAN Ethernet to I²C Bus adapter.
2. Assert /INT signal while accessing EEPROM.
3. Display adapter Type/SN in Communication Settings.
4. Display all available adapters in Communication Settings.
5. Software maintenance update.

1. Add support for i2cStick USB to I²C Bus adapter.
2. Add iBurner Script Engine exit code (0=Success, -1=Fail).
3. Make slave address spin box up arrow increment slave address.
4. Revise GUI and Script Creator user interface.
5. Add Beep operation to Script Creator.
6. Add Script Engine Automation Examples.

1. Enhance Script Engine validation, error handling, and logging.
2. Abort script processing immediately on command error detection. Quit command accepted but no longer required.
3. Correct Script Creator “Load” command offset generation.
4. Add script “*beep” command (beep computer speaker).
5. Add script “*settings” command (log current device settings).
6. Optimize Script Creator script generation.
7. Set initial Load/Save Buffer and Script folder.

1. Correct multi-byte (more than 256 bytes) EEPROM address register access.

1. Programming automation support with Script Builder tool.
2. Automatically configures optimum communication settings.
3. Expanded EEPROM/Buffer checksum (CRC-16) capability.
4. More I2C EEPROM device definitions.
5. Audit operations with built-in logging facilities.

• i2cStick (#MIIC-207, Datasheet).
• iPort/LAN (#MIIC-205, Datasheet)
• iPort/USB (#MIIC-204, Datasheet)
• iPort/AFM (#MIIC-203, Datasheet)
• iPort/AI (#MIIC-202, Datasheet)

This copyrighted product  is offered free of charge to current owners of our iPort/AI, iPort/AFM, iPort/USB, iPort/LAN, and i2cStick I²C Bus host adapters. Its use is covered by the MCC End User License Agreement included with the downloadable package below.

• Windows XP, Vista, 7, or 8.
• MS.NET Framework V2 or higher.
• MCC iPort/AI, iPort/AFM, iPort/USB, iPort/LAN, or i2cStick I²C Bus host adapter.
• MCC iPort Utility Pack v5.6+ for iPort/USB, iPort/LAN, or i2cStick driver software.

To install this version of  iBurner on your computer, follow these instructions:

1. Click the Download link below and save the file to your download or a temporary folder on your Windows based PC.
2. After the download is complete, Double-click the file to install. Follow on screen instructions.
3. After installation, click Start | Programs | iBurner | iBurner to start the program.
4. See the User's Guide for additional instructions.

Do you find iBurner useful? We would like your Feedback.